Grand Prize Winner Tests Inverter in ACEP Lab
In 2018, received the grand prize laboratory testing award in the AVÀÇÂÛ̳ Center for Microgrid Technologies Commercialization competition. The company is developing an 80-kilowatt, three-phase 480 V SiC inverter capable of operating in an islanded microgrid either in parallel with other grid-forming sources or as the sole grid-forming source.
Intergrid, an inverter company based in Temple, New Hampshire, specializes in power
electronics for renewable energy. Intergrid has designed inverters ranging in power
from 200 watts to 200 kW, including the inverter for the Skystream wind turbine, which
has 10,000 units in the field.
As part of the award, Intergrid spent two weeks in Fairbanks in the ACEP Engineering
Learning and Innovation Facility lab, where ACEP engineers have been providing support
in the following areas: development and validation of three-phase inverter control
algorithms using controller hardware-in-the-loop (CHIL), validation of the integrated
microgrid control approach using the same CHIL platform including easYgen genset controllers,
and programming support for the programmable logic controller-based microgrid controller,
which will include various dispatch strategies.
´¡°ä·¡±Ê’s Opal-RT-based CHIL platform has proved invaluable for this work. A typical remote microgrid
with renewables might include diesel generators; renewable sources such as wind, solar
or hydro coupled to the grid with an inverter; distribution lines; and various loads.
Developing an overall microgrid control strategy as well as individual component controllers
(especially the inverter) is most often done via pure simulation, where both the power
system components and the control algorithms are simulated. However, there will still
be significant testing required when the controls are implemented on the real-world
platform. In addition to troubleshooting the actual hardware implementation, including
wire connections and the input/output (IO) circuitry, there will also be considerable
time required to validate the controls as coded on the real-world control chip. In
a CHIL experiment, all the power system components mentioned above are modeled on
a real-time simulator (RTS). The RTS is capable of simulating the voltages and currents
of these components in real-time. What does this mean? It means that if an event would
take one second in the real world, it will take the RTS one second to simulate the
same thing. Why is this valuable? Because if you also have sufficient IO interfaces
to digital signals from the model to real-world signals for the controller, and vice-versa,
you can use your ready-to-go real-world controller to control these models just as
if it were controlling the real thing.
´¡°ä·¡±Ê’s Jeremy Vandermeer (left) and Mariko Shirazi (right) work with Intergrid’s Rob Wills (center) on testing Intergrid’s new inverter. Photo by Amanda Byrd.